======  Hyundai MB-810 (Mobitel) on linux ======
taken from LUGOS-LIST :)


Malo je sicer tricky, ker za data uporablja ttyUSB2, za query pa ttyUSB1. Port
ttyUSB0 pa pojma nimam zakaj se nuca.

Poleg tega da sem v option.c zavedel product in vendor id od modema ter modul
prevedel, zgleda moja konfiguracija nekako tako:

**''/etc/udev/rules.d/75-hyundai.rules''**
<code>
==================================
# usb_modeswitch ni potreben, zadostuje že eject
ACTION=="add", SYSFS{idProduct}=="f000", SYSFS{idVendor}=="1e0e",
RUN+="/usr/bin/eject %k"
# linki za večjo preglednost in diferenciacijo po com portih
ACTION=="add", KERNEL=="ttyUSB2",  SUBSYSTEM=="tty", SYSFS{idProduct}=="9000",
SYSFS{idVendor}=="1e0e", SYMLINK+="modem_data"
ACTION=="add", KERNEL=="ttyUSB1",  SUBSYSTEM=="tty", SYSFS{idProduct}=="9000",
SYSFS{idVendor}=="1e0e", SYMLINK+="modem_query"
</code>

**''/etc/ppp/chap-secrets''**
<code>
=====================
mobitel * internet
</code>

**''/etc/ppp/options''**
<code>
================
asyncmap0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
</code>

**''/etc/ppp/peers/mobitel''**
<code>
======================
usepeerdns
defaultroute
connect "/usr/sbin/chat -v -f /etc/chatscripts/mobitel"
/dev/modem_data
921600
user "mobitel"
</code>

**''/etc/chatscripts/mobitel''**
<code>
========================
ABORT 'BUSY'
ABORT 'NO CARRIER'
ABORT 'ERROR'
'' AT
OK AT+CGATT=1
OK AT+CGDCONT=1,"IP","internet"
OK ATD*99#
</code>

...in gremo:

vštekaš modem in čakaš da se na namizju pojavi 4GB pogon (gori 
rdeča lučka na modemu)

   comgt -d /dev/modem_query (te vpraša za PIN, sledi priklop v omrežje)

...nato kličeš:

   sudo pon mobitel