taken from LUGOS-LIST :)
Malo je sicer tricky, ker za data uporablja ttyUSB2, za query pa ttyUSB1. Port ttyUSB0 pa pojma nimam zakaj se nuca.
Poleg tega da sem v option.c zavedel product in vendor id od modema ter modul prevedel, zgleda moja konfiguracija nekako tako:
/etc/udev/rules.d/75-hyundai.rules
==================================
# usb_modeswitch ni potreben, zadostuje že eject
ACTION=="add", SYSFS{idProduct}=="f000", SYSFS{idVendor}=="1e0e",
RUN+="/usr/bin/eject %k"
# linki za večjo preglednost in diferenciacijo po com portih
ACTION=="add", KERNEL=="ttyUSB2", SUBSYSTEM=="tty", SYSFS{idProduct}=="9000",
SYSFS{idVendor}=="1e0e", SYMLINK+="modem_data"
ACTION=="add", KERNEL=="ttyUSB1", SUBSYSTEM=="tty", SYSFS{idProduct}=="9000",
SYSFS{idVendor}=="1e0e", SYMLINK+="modem_query"
/etc/ppp/chap-secrets
===================== mobitel * internet
/etc/ppp/options
================ asyncmap0 noauth crtscts lock hide-password modem lcp-echo-interval 30 lcp-echo-failure 4
/etc/ppp/peers/mobitel
====================== usepeerdns defaultroute connect "/usr/sbin/chat -v -f /etc/chatscripts/mobitel" /dev/modem_data 921600 user "mobitel"
/etc/chatscripts/mobitel
======================== ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'ERROR' '' AT OK AT+CGATT=1 OK AT+CGDCONT=1,"IP","internet" OK ATD*99#
…in gremo:
vštekaš modem in čakaš da se na namizju pojavi 4GB pogon (gori rdeča lučka na modemu)
comgt -d /dev/modem_query (te vpraša za PIN, sledi priklop v omrežje)
…nato kličeš:
sudo pon mobitel