Differences

This shows you the differences between two versions of the page.

--- windows:ipv6 [2010/06/09 09:42]
greebo created
+++ windows:ipv6 [2013/07/09 13:43]
zagi
@@ Line 1: / Line 1: @@
-turn off temporary addresses - netsh interface ipv6 set privacy state=disable
+turn off temporary addresses - netsh interface ipv6 set privacy state=disable\\
 use EUI-64 interface identifiers - netsh interface ipv6 set global randomizeidentifiers=disabled
+Enable icmp echo-request in Windows IPv4 and IPv6
+netsh advfirewall firewall add rule name="icmpv6 echo-request" dir=in action=allow protocol=icmpv6:128,any
+netsh advfirewall firewall add rule name="icmpv4 echo-request" dir=in action=allow protocol=icmpv4:8,any
+== Windows IPv6 network tweaks ==
+Windows by default generate random interface IDs for non-temporary autoconfigured IPv6 addresses.
+To change this type:
+  netsh interface ipv6 set privacy state=disabled store=active
+  netsh interface ipv6 set privacy state=disabled store=persistent
+  netsh interface ipv6 set global randomizeidentifiers=disabled store=active
+  netsh interface ipv6 set global randomizeidentifiers=disabled store=persistent
+Disable 6to4 and Teredo, by entering the following commands in an Administrator shell:
+  netsh interface teredo set state disabled
+  netsh interface ipv6 6to4 set state state=disabled undoonstop=disabled
+  netsh interface ipv6 isatap set state state=disabled
+and/or  disable IP helper service:
+  net stop "IP Helper"
+or use http://support.microsoft.com/kb/929852#fixit4me