Differences

This shows you the differences between two versions of the page.

--- linux:perc [2007/10/30 11:53]
a created
+++ linux:perc [2009/05/25 00:35] (current)
@@ Line 3: / Line 3: @@
 useful links:
    * [[http://msmvps.com/blogs/onq/archive/2007/03/30/on-dell-s-perc-5-i.aspx|On Dell's PERC 5/]]
-   * [[
+   * [[http://linux.dell.com/debian_9g.shtml]]
+   * [[http://www.thegeekstuff.com/2008/11/how-to-manage-dell-servers-using-omsa-openmanage-server-administrator-on-linux/|How To Manage Dell Servers using OMSA - OpenManage Server Administrator On Linux]]
+===== Dell PERC 6/i and RAID monitoring =====
+A few pointers for people trying to get Dell's PERC 6/i RAID monitoring working under Ubuntu, and any other linux for that matter. It also applies to PERC 5/i too, and... other stuff :-)
+First, visit [[http://linux.dell.com/|Dells Linux]] site. Have a poke about, see what's there.
+Next, we need to download a tool to get information from your array. Download LSI's MegaRAID CLI tool for linux. It comes as a .RPM, so if you're an ubuntu user, you can convert it to a .deb using alien, or convert it to a .tar.gz.
+   # alien --to-tgz MegaCli-1.01.39-0.i386.rpm
+You then have a CLI tool you can use to get all your data now! For example:
+   # ./opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -Lall -aALL | grep State State: Optimal
+One thing I spent a while figuring out was how to get the rebuild progress, so here's how:
+   # ./opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ShowProg -PhysDrv \[32:1\] -aALL
+There's also a really useful [[http://tools.rapidsoft.de/perc/perc-cheat-sheet.pdf|cheat sheet]] for common tasks
+Don't forget to actually monitor this output with nagios, or your favorite monitoring tool!
 ===== PERC 5/i =====
@@ Line 12: / Line 36: @@
 install ''**dellomsa**''
    apt-get install dellomsa
+==== Creating new virtualdisk array (RAID) ====
+see manual: [[http://support.dell.com/support/edocs/software/svradmin/1.9/en/stormgmt/cli.html|Dell OpenManage™ Storage Management User's Guide CLI]]
+<code shell>
+# /opt/dell/srvadmin/oma/bin/omconfig storage controller action=createvdisk controller=0 raid=r1 size=max adisk=0:0:2,0:0:3 readpolicy=ara writepolicy=wb
+</code>
+==== kernel options ====
+Fallowing things in kernel must be compiled as modules
+   # IPMI
+   CONFIG_IPMI_HANDLER=m
+   CONFIG_IPMI_PANIC_EVENT=y
+   CONFIG_IPMI_PANIC_STRING=y
+   CONFIG_IPMI_DEVICE_INTERFACE=m
+   CONFIG_IPMI_SI=m
+   CONFIG_IPMI_WATCHDOG=m
+   CONFIG_IPMI_POWEROFF=m
+    CONFIG_DELL_RBU=m
+    CONFIG_DCDBAS=m
+==== diagnostic tool usage ====
 to access PERC
@@ Line 42: / Line 94: @@
+===== Monitoring Dell SAS 5/iR RAID with nagios =====
+see: [[http://www.drugphish.ch/~ratz/mpt-status/readme.txt]]
+:08.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 01)
+           Subsystem: Dell SAS 5/iR Adapter RAID Controller
+The status of this RAID card can be read using mpt-status, in Gentoo this package is available as sys-block/mpt-status.  Here's an example of the output:
+   # mpt-status
+   ioc0 vol_id 0 type IM, 2 phy, 148 GB, state OPTIMAL, flags ENABLED
+   ioc0 phy 1 scsi_id 32 ATA      WDC WD1600JS-75N 2E04, 149 GB, state ONLINE, flags NONE
+   ioc0 phy 0 scsi_id 1 ATA      WDC WD1600JS-75N 2E04, 149 GB, state ONLINE, flags NONE
+The latest 'check_mpt' script can be found on Nagios Exchange.  Download it and put it in your libexec folder, for me on gentoo its '/usr/nagios/libexec/'.  Open the file, and make sure the 'use lib' line points to the correct place.
+The script uses sudo to run mpt-status, so you'll need to modify your /etc/sudoers - adding a line like this:
+   %nagios ALL=(ALL) NOPASSWD:/usr/sbin/mpt-status
+Next, you need to configure nagios, your filenames might be different from the names I use below.
+/etc/nagios/commands.cfg : Note, the -c param refers to the number of disks you expect to be active.
+   define command{
+     command_name  check_mpt
+     command_line  $USER1$/check_mpt -c 2
+  }
+/etc/nagios/localhost.cfg
+   define service{
+     use                  local-service
+     host_name            localhost
+     service_description  mpt - Dell Raid
+    check_command        check_mpt
+  }
+Reload nagios, on gentoo, it's /etc/init.d/nagios reload